• | Shop With Afterpay I ZIP I Laybuy I PayItLater

CMC M-138 Alfa Romeo 6C 1750 GS, 1930

SKU: M-138

or make 4 interest-free payments of $188.75 AUD fortnightly with More info

M-138 CMC Alfa Romeo 6C 1750 GS, 1930 Scale 1:18 In the 1930s, Alfa Romeo still didn’t produce their own bodywork's, but they bought: In the case of the 6C 1750 GS, the body came...

M-138 CMC Alfa Romeo 6C 1750 GS, 1930 Scale 1:18

In the 1930s, Alfa Romeo still didn’t produce their own bodywork's, but they bought: In the case of the 6C 1750 GS, the body came from the coach builder Zagato. This turned out to be a good choice, because again Zagato did a great job with his distinctive design language. The four-meter-long car had two spare wheels that were stowed in a rear well. In the event of bad weather, a textile top offered emergency cover or protection against rain. A striking feature of this car was the removable red plastic covers on the three headlights, which were intended to improve the aerodynamics of the vehicle.
The 1750 GS was powered by a 6-cylinder in-line engine that Vitorio Jano, the brilliant chief engineer of Alfa Romeo, had developed. It generated a remarkable 85 hp at 4500 rpm. Several factory race cars had their cylinder heads welded (testa fissa) so that they could rev up to 5000 rpm, yielding a magnificent output of 102 hp. Whether equipped with 85 or 102 hp, the Gran Sport excelled.
Owing to a low total weight of 920 kg and a reduced wheelbase of 2745 mm that improved its handling dramatically, the Gran Sport became the most famous Alfa Romeo of the time. Numerous important victories all over Europe, as in the 1930 and 1931 Mille Miglia and the wet race of the Irish Tourist Trophy -- to name just a few -- made it the undisputed dominator of that racing era. Only the rigorous endurance race of the 24 Hours of Le Mans proved to be too much for the 6C 1750 GS.

Model Description
-Hand-assembled precision metal model with right-hand drive, built from 1,800 single parts, of which 1,311 are made of metal
-True-to-scale, authentic replication of the Spyder body customized by the renowned coach builder Zagato
-Metal framing of multiple body parts
-Highly detailed 6-cylinder in-line engine, complete with all aggregates, pipes and cabling in addition to a front-mounted Roots supercharger and accessories
-Distinctive Alfa Romeo front end with the famous triple-headlight unit.
-Headlights fitted with mesh guards against stone-chip damages. The red caps are removable
-Double-winged engine hood that opens to rest on metal studs
-Finely-woven metal grille to protect the radiator fins
-Windshield with a semi-fixed metal mounting-frame
-Functional doors mounted on finely-recreated hinges
-One lateral filler of the oil tank located within the cockpit, and one rear filler of the fuel tank made of stainless steel, each with a flip-open cap
-Luggage space with a functional lid behind the folded textile top
-Highly-detailed cockpit with upholstered leather seats and door trimmings
-Precise recreation of the dashboard with all instruments and controls
-Functional brackets for holding the two spare wheels. Loosening a tommy screw releases the spare wheels
-Perfectly-wired wheels with a light alloy rim, stainless steel spokes and nipples
-Unscrew the central locking nuts (with side-dependent right- and left-hand threads) to remove the wheels
-Elaborate undercarriage, which reveals a “cast metal” type of front/rear axles as well as the fine detailing of the mechanical brake rigging, leaf springs, and friction-shock absorbers, all being made of metal

Technical Data (Original Vehicle)
-Two-seater Spyder with a Zagato light-alloy body
-Steel box frame
-6-cylinder in-line engine with dual overhead camshafts
-Crankcase and cylinder heads made of light alloy
-Four speed gearbox with an open gear lever gate
-Front and rear rigid axle with leaf springs and friction damper
• Maximum output: 85 hp at 4,500 rpm / 102 hp at 5,000 rpm (factory race cars 1930)
• Displacement: 1,752 cc
• Bore x stroke: 65 x 88 mm
• Wheel base: 2,745 mm
• Track front / rear: 1,380 / 1,380 mm
• Mixture preparation: Roots supercharger with Memini dual flat-flow carburetor
• Total weight: 920 kg (85 hp) / 840 kg (102 hp, factory race cars 1930)
• Top speed: 145 km/hr (85 hp), approx. 170 km/hr (102 hp)


 Delivery times are Monday-Friday. Most goods can take up to 5-10 business days & furniture 5-12 business days depending on your location.

To ensure costs are minimised the furniture is typically delivered by the driver who may require assistance with heavy items. Furniture deliveries are to the ground floor of your building. Shipping of furniture may take 5-12 business days depending on your location in Australia. Please ensure you provide a contact phone number for the driver to make delivery arrangements.

Please Note: Delivery to rural areas may incur a delivery charge


HOW LONG DOES IT TAKE TO RECEIVE MY ORDER? Australia - 7-14 Business days (in most cases a lot faster) We Print To Order. 

New Zealand -8-15 Business days (in most cases a lot faster) All Other Countries -14 Business Days (No more than 28 Days in remote areas)

Please Take Into Consideration Public Holidays, Christmas, Chinese New Year etc

For Logistic Reasons we may send your Canvases Separately

** Please Note If We Are Out Of Stock We Will Send It Direct From Our Warehouse. 

Coronavirus impacts to delivery services
We’re experiencing delivery delays at the moment, due to limited flights, social distancing requirements and increased parcel volumes.

We appreciate your patience during this time.

Or 6 weekly interest free payments from $125.83 with what's this?