CMC M-162 Auto-Union Type C Hill Climb Version #111 Schauinsland, 1937 Scale 1:18
The legendary hill-climb track at the Schauinsland Mountain near Freiburg was internationally famous. The first hill-climbing race took place there in 1925. In the following years, the race grew to be an international competition, which often attracted more than 20,000 spectators during the golden era of the Schauinsland hill climbs in the ’30s.
This was very true of the 13th Schauinsland hill climb during the Grand Prix of Germany; it took place on August 1st,1937 and boasted a registration list of drivers from 10 different nations. Most noteworthy were the two top racing teams: Auto Union with Hans Stuck and Bernd Rosemayer and Mercedes-Benz with Rudolf Caracciola, Manfred v. Brauchitsch and Hermann Lang. The race-track was 12 km long, leading all the way to the top of Schauinsland Pass with 178 turns for drivers to negotiate and an ascent of 780 meters on slopes that could be 12˚ uphill.
At the end of the race, Hans Stuck lived up to his nickname “King of the Mountains” and raced his Auto Union Type C with twin-tire rear wheels and starting number 111 to be the winner by using one second less than his teammate Bernd Rosemayer. The latter was also on a Type C, but with single-tire rear wheels. Mercedes-Benz didn’t have a chance that day. Rudolf Caracciola and Hermann Lang, each on a W125, finished 3rd and 4th.
Back then the drive-axle was often fitted with twin tires in order to improve the transmission of motor torque onto the road. This resulted in better traction and made it easier to control the veer-off forces in narrow hill curves. But ultimately, it was not only the engine power, but also the driving skills and, above all, the cornering technique of a pilot that were essential for winning the victory.
Our hand-crafted metal precision model is a replica of Hans Stuck’s winning vehicle with starting number 111 and twin-tire rear wheels.
-Hand-assembled precision metal model, built from 1,203 single parts
-Removable front – and engine hood with real rubber O-rings for locking hooks
-True-to-the-original replication of the 16-cylinder V-type engine with all aggregates, pipes and cabling
-Dual exhaust system made of metal
-Crank-arm front suspension with friction-shock absorbers made of metal
-Metal rear axle with oscillation dampers
-Handcrafted radiator grill of stainless steel with a detailed cooling system and oil/fuel delivery lines
-Openable fuel tank cap made of stainless steel
-Cockpit fitted with a textile-covered driver seat and dashboard with interesting, in airplane – look designed instruments with a dominating r.p.m. counter as a round instrument
-Perfectly-wired wheels with a light alloy rim, stainless steel spokes and nipples. Wheels removable; tool for rearwheel central locking nut enclosed.
Schauinsland specific model equipment:
• Elimination of the side-mirrors left and right
• Vertical air intake slit below the radiator grill
• Auto Union emblem (4-rings) on the front in 3D-design
• Imprint “Hans” on the outside of the cockpit on the both sides
• Twin-wheels on the rear axle, mounted with octagon-screws
• The starting number 111 in red, printed by the ink printing method left and right on the middle of the car and also on the rear
Occasionally, the wheel base of the Auto Union bolides became shortened and the fuel tank became downsized, at classic hill climb races. Original data thereto were unfortunately not available.
Technical Data (Original Vehicle)
-Monoposto with free-standing wheels on a tubular frame
-2 valves per cylinder, controlled by one overhead cam shaft
-Dry sump lubrication
• Maximum output: 520 hp at 5,000 rpm
• Displacement: 6,005 cc
• Top speed: depending from transmission / rear axle ratio
• Mixture preparation: 1 Solex Horizontal dual-carburettor
• Maximum torque: 870 Nm
• Bore x stroke: 75 x 85 mm
• Wheel base: foreshortened
• Track front / rear: 1,420 / variable (single / twin-tire rear wheels)
• Total length: variable (foreshortened chassis)
FREE DELIVERY AUSTRALIA WIDE
Delivery times are Monday-Friday. Most goods can take up to 5-10 business days & furniture 5-12 business days depending on your location.
To ensure costs are minimised the furniture is typically delivered by the driver who may require assistance with heavy items. Furniture deliveries are to the ground floor of your building. Shipping of furniture may take 5-12 business days depending on your location in Australia. Please ensure you provide a contact phone number for the driver to make delivery arrangements.
Please Note: Delivery to rural areas may incur a delivery charge
CANVAS PRINTS FREE DELIVERY WORLDWIDE
HOW LONG DOES IT TAKE TO RECEIVE MY ORDER? Australia - 7-14 Business days (in most cases a lot faster) We Print To Order.
New Zealand -8-15 Business days (in most cases a lot faster) All Other Countries -14 Business Days (No more than 28 Days in remote areas)
Please Take Into Consideration Public Holidays, Christmas, Chinese New Year etc
For Logistic Reasons we may send your Canvases Separately
** Please Note If We Are Out Of Stock We Will Send It Direct From Our Warehouse.
Coronavirus impacts to delivery services
We’re experiencing delivery delays at the moment, due to limited flights, social distancing requirements and increased parcel volumes.
We appreciate your patience during this time.
Or 6 weekly interest free payments from $92.50 with what's this?